Tuesday, May 26, 2015
first try at gold filled metal
So today I decided to work with some gold filled material . Gold filled metal is a much cheaper alternative than gold but of much higher quality than gold plated . The one I used is 14/20 meaning 5% off the metal is 14karat gold . The core is made of brass. The difference between gold plated and gold filled is the quality and the thickness of the layer while with gold plated you only get a microscopic film of 14k gold the gold filled layer is much thicker and bonded to the core via heat and pressure making it tarnish resistant.
I took a 6 gauge half round 14/20 gold filled wire and cut it to a 6 inch length then took a planishing hammer and hammered with the round ( ball ) side of the hammer until you get the nice honeycomb texture. Both ends were filed by hand being careful not to damage the gold layer and then formed on a wooden ring mandrel. Then I just took a small sunshine polishing cloth to take care of any smudges.