lucky clover

A pretty easy project really .All you need is your saw ,paper ,metal sheet ,patina , hole punch pliers ,chain and jump ring .
Draw your glover leaf onto paper and stick that on the metal sheet .When I make something simple like that I use 18 gauge sterling silver. 20 gauge is too thin in my opinion .I know a lot use 20 or 22 gauge as the cost is much lower. After transferring your design onto the sheet simply start cutting with the jewelry saw. File your edges . add patina ( for polishing you can use sand paper or steel wool )
punch a hole add your jump ring and voila . done. I added mine to the guitar i made the previous day,



if you are interested . I have a shop

www.nicilaskin.etsy.com

Flaming guitar pick

Rock and Roll Baby ………….

sterling guitar pick pendant with brass flames

the reason – just because I wanted to and I can

I cut out some equal sized guitar picks

one in 20 gauge sterling and one in 20 gauge brass ( copper or bronze will work too ) I filed the edges round with a number 2 file ( pretty fine )

draw your flames onto the brass pick and start cutting with a jewelry saw and 1/0 saw blades

flux your brass flames and add solder – heat with torch until solder melts

solder both sterling and brass together

after quenching and cleaning start filing with a number 2, 3 or 4 file

see the gap ? gap no good , better start filing

file until the solder seam is smooth

start polishing

I just left the metal raw and satin looking and did not add patina drill a hole

add a jump ring and a chain and start rocking

thanks for looking :)

www.nicilaskin.etsy.com