Showing posts with label how to make jewelry. Show all posts
Showing posts with label how to make jewelry. Show all posts

Saturday, May 30, 2015

little spirit bear


fresh from the bench

fresh from the bench
spirit bear and garnet

I made my own die for pressing out the bears

I made my own die for pressing out the bears

soldered on a bezel cup and added some stars

soldered on a bezel cup and added some stars
also punched a hole

patina to darken the stars

patina to darken the stars

polished the bear

polished the bear

added jump ring and chain

added jump ring and chain


Tuesday, May 26, 2015

first try at gold filled metal

fresh from the bench

gold gold1 gold2  gold4
So today I decided to work with some gold filled material . Gold filled metal is a much cheaper alternative than gold but of much higher quality than gold plated . The one I used is 14/20 meaning 5% off the metal is 14karat gold . The core is made of brass. The difference between gold plated and gold filled is the quality and the thickness of the layer while with gold plated you only get a microscopic film of 14k gold the gold filled layer is much thicker and bonded to the core via heat and pressure making it tarnish resistant.
I took a 6 gauge half round 14/20 gold filled wire and cut it to a 6 inch length then took a planishing hammer and hammered with the round ( ball ) side of the hammer until you get the nice honeycomb texture. Both ends were filed by hand being careful not to damage the gold layer and then formed on a wooden ring mandrel. Then I just took a small sunshine polishing cloth to take care of any smudges.

Monday, March 24, 2014

lucky clover

OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA

A pretty easy project really .All you need is your saw ,paper ,metal sheet ,patina , hole punch pliers ,chain and jump ring .
Draw your glover leaf onto paper and stick that on the metal sheet .When I make something simple like that I use 18 gauge sterling silver. 20 gauge is too thin in my opinion .I know a lot use 20 or 22 gauge as the cost is much lower. After transferring your design onto the sheet simply start cutting with the jewelry saw. File your edges . add patina ( for polishing you can use sand paper or steel wool )
punch a hole add your jump ring and voila . done. I added mine to the guitar i made the previous day,

OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA

if you are interested . I have a shop

www.nicilaskin.etsy.com

Saturday, March 22, 2014

Flaming guitar pick

Rock and Roll Baby ………….

sterling guitar pick pendant with brass flames

the reason – just because I wanted to and I can

I cut out some equal sized guitar picks

one in 20 gauge sterling and one in 20 gauge brass ( copper or bronze will work too ) I filed the edges round with a number 2 file ( pretty fine )

draw your flames onto the brass pick and start cutting with a jewelry saw and 1/0 saw blades

flux your brass flames and add solder – heat with torch until solder melts

solder both sterling and brass together

after quenching and cleaning start filing with a number 2, 3 or 4 file

see the gap ? gap no good , better start filing

file until the solder seam is smooth

start polishing

I just left the metal raw and satin looking and did not add patina drill a hole

add a jump ring and a chain and start rocking

thanks for looking :)